The electric pipe threader is a movable fixed power tool. The hand-held electric pipe threader is a light hand-held electric pipe threader, also called a portable electric pipe threader. The hand-held electric Threading Machine has the characteristics of small size, labor saving, convenient operation, high work efficiency and low cost. Today, Xiaobian will tell you about the oil added to the Threading Machine. Handheld electric Threading machine product advantages and operating instructions.
　　 What oil is added to the threader?
The threader should be filled with cutting fluid.
Electric Threading Machine, Bench Drilling Machine, Machine Tool Lathe, the cutting fluid should be preferred.
The role of the cutting fluid is to cool the lubrication, rust and the like.
Used in electric Threading Machine, it can reduce the wear of the ferrule and reduce the temperature of the ferrule.
　　 Advantages of Handheld Electric Threading Machine (take SQ-1 Handheld Electric Threading Machine as an example)
The hand-held electric Threading Machine is lighter in weight than the bench-top electric Threading Machine and can be quickly replaced;
The operation is labor-saving, fast, and convenient to carry;
Unlimited by the venue, it can be operated flexibly on the construction site or in unconventional situations.
This product is suitable for industrial and mining enterprises, colleges, home maintenance, small and medium-sized engineering teams, and can be used for operation during heating, tap water, heating, gas, etc.
This product supports the use of standard tubes.
　　 Operating instructions for hand-held electric pipe threader (take SQ-1 hand-held electric pipe threader as an example)
1. Select the corresponding die head, pull the circlip straight, and install it on the host from the right.
2, clamp the positive, clamp the tube, about the same length as the force arm (L2 is about the same length as L1).
3. Put the positive and negative switch in the down arrow position to activate the switch and the auxiliary contact.
4. When installing rigid pipes such as stainless steel pipes, galvanized pipes and copper pipes, it is necessary to refuel in time. The plastic pipes do not need to be refueled.
4. Note that the pipe clamp cannot be in contact with the host during the right shift, otherwise the host will be injured.
5. After the machine stops, pull the reverse switch up arrow position and exit the pipe.
What oil is added to the threader? I believe everyone should have an answer after reading the article. The hand-held electric Threading Machine can cut threads on the pipes that are not disassembled and in narrow spaces, and is widely used in pipeline installation and maintenance projects in various industries. If the Threading Machine equipment is not used for a long time, the plug should be unplugged, and the anti-rust oil should be applied to the front and rear guide posts and other running surfaces, and stored in a dry and ventilated place.
The Carbon Crystal Heating Panel is a new kind of heating product. The heating meaterial is made from carbon crystal which is better than carbon fiiber. The heating effect is the best among the electric heaters.
The Carbon Crystal Heater has many advantages, such as clean, and beautiful looking, and not any pollution, and no noise.
The using of this heater is for example: a 20m2 room will need about 1500 - 2000w, the choose then can be 4pcs x 400w or 4pcs x 500w.
We are the biggest manufacturer in China of heating panels. Our Laiwu factory covers more than 130000m2, more than 200 employee, and annual output is now half million pcs.
Dexiang heater has all certificate needed, such as ISO, CE, ETL, etc.
We welcome all customer all over the world come to visit us and be friend !
Warmer Appliance,Infrared Radiant Panel Heaters,Floor Infrared Heater,Bed Mattress
Shandong Dexiang Electrical Technology Co.,Ltd , https://www.infraredroomheater.com