People's living standards have gradually improved, and the requirements for the quality of home improvement have become higher and higher, and the standards for environmental protection have become higher and higher. Js composite waterproof coating is a home improvement coating that has been highly praised and loved in recent years. People no longer use ordinary paint to paint walls. This new type of js composite waterproof coating refers to polymer cement waterproof coating, in which j It refers to the polymer and s is cement. Next, Xiaobian will take you to see the relevant content of js composite waterproof coating.
First, the main features
1. Wet surface construction; the coating is tough and strong.
2. Adding pigment can be made into a colored decorative layer.
3, non-toxic, tasteless, can be used for waterproofing of food pools.
4. It is suitable for waterproofing, façade, inclined surface and top surface construction of exterior wall and inclined roof of facing material. It can be firmly bonded with various outer layer materials such as base surface and facing brick, roofing tile and cement mortar.
5, high temperature resistance (140 ° C), especially suitable for road and bridge waterproof.
6. Adjust the mix ratio to make tile bonding materials and sealing materials.
Second, the construction method
1. The base surface must be flat, firm, clean, and free of water. The uneven surface must be leveled first, and the yin and yang angles should be rounded.
2, according to the specified proportion of the material, if you need to add water, first added to the liquid material, with a stirrer while stirring.
Stir well until the pellets are free of agglomerates (mixing time is more than 3 minutes, preferably without stirring by hand).
The ratio of the weight of the primer: liquid material: powder: water = (I) 10: 10: 10, (II) 10: 10: 10, the amount is about 0.5 kg / m2;
The ratio of the lower layer, the middle layer and the upper layer coating by weight is: liquid material: powder: water = (I) 10:7:0-1, (II) 10:10:0-2, about 1 kg/m2 per layer.
The top coat can be pigmented to form a colored waterproof layer.
In the specified water addition range, the construction of the slope, top surface or facade shall be added or not added, and the plane construction shall be added more. The dosage per square meter is 3~4kg, and the construction thickness is 1.5-2mm.
3, select the appropriate tools (rollers, brushes, or scrapers, etc.), in accordance with the corresponding method, in the order of the bottom layer → lower layer → middle layer → upper layer layer by layer. Share from Yuexin Building Materials.
4. The construction of the mortar protective layer or decorative layer shall be carried out 2 days after the completion of the waterproof layer. When sanding the mortar, in order to facilitate the construction, the clean medium coarse sand should be sprinkled immediately after the last time the waterproof layer is applied.
If the liquid material: powder = 10: 20-30 is adjusted into a putty shape, it can also be used as a bonding and sealing material.
How about, read the above introduction to js composite waterproof coating, is not to understand a lot of js composite waterproof coating related content. I hope that you can learn more about home improvement knowledge through this article, and you will be able to create a more perfect home environment. Thank you for reading this article and your support and love for Xiaobian. If you want to get more information about home improvement, please continue to pay attention to the decoration home network.
More related wonderful reading:
JS waterproof coating misunderstanding, detailed explanation of JS waterproof coating
What is JS waterproof coating? How to construct JS waterproof coating?
Single Tube Tri-Proof Light,Single Tube Classic Light Fixtures,Single Tube Light Fixture,Tri-Proof Lights
Land of Lights Electric Appliance Co., LTD , https://www.loloutdoorlight.com