Ultrasonic welding machine model and price reference

The model and price reference of the ultrasonic welding machine is the key content of this article. Let us first understand the working principle of the ultrasonic welding machine.

Ultrasonic welding machine principle

When ultrasonic waves act on the thermoplastic plastic contact surface, high-frequency vibrations of tens of thousands of times per second are generated. This high-frequency vibration of a certain amplitude transmits ultrasonic energy to the weld zone through the upper weldment, because the weld zone is two At the interface of the weld, the acoustic resistance is large, so local high temperatures are generated. Moreover, due to the poor thermal conductivity of the plastic, it can not be dissipated in time and gather in the weld zone, so that the contact faces of the two plastics melt rapidly, and after a certain pressure, they are integrated into one. When the ultrasonic wave stops, let the pressure last for a few seconds to solidify it, thus forming a strong molecular chain for welding purposes, the welding strength can be close to the strength of the raw material.

Ultrasonic welding machine price

Ultrasonic plastic welding machine in Shantou area, etc. ¥7500.00

Chongqing ultrasonic plastic welding machine plastic welding machine equipment price welding machine ¥ 10900.00

Ultrasonic welding machine manufacturers plastic welding machine price ultrasonic plastic welding machine ¥12000.00

Ultrasonic welding machine model

Ultrasonic welding machine models can be divided into four types: A type, B type, M type and D type. Type A: A method of displaying tissue features in a waveform, which is mainly used to measure the diameter of an organ to determine its size. Can be used to identify some physical properties of the diseased tissue, such as substantial, liquid or gas presence. Type B: Display the specific situation of the organization being explored in the form of a flat graphic. When inspecting, firstly, the reflected signal of the human body interface is converted into light spots with different strengths and weaknesses. These light spots can be visualized through the fluorescent screen. This method is intuitive and reproducible, and can be used for comparison before and after, so it is widely used in maternity products. Diagnosis of systemic diseases such as urology, urinary, digestive and cardiovascular diseases. M type: is a method for observing the time change of the active interface. It is most suitable for checking the activity of the heart. The dynamic change of the curve is called echocardiography. It can be used to observe the position, activity state and structure of the various layers of the heart. It is often used to diagnose the diagnosis of heart and large blood vessel diseases. Type D: An ultrasound diagnostic method specifically designed to detect blood flow and organ activity, also known as Doppler ultrasound. It can be determined whether the blood vessels are unobstructed, whether the lumen is narrow, occlusion, and the lesion.

Ultrasonic welding machine instructions

I. Instructions for use The installation and use of this machine must be carried out by trained personnel. Be sure not to touch the welding tool head during work. Ultrasonic vibrations can cause severe skin burns. The operator is allowed to use an ultrasonic welder after proper training. Before the machine is maintained and repaired, the power should be cut off to prevent misoperation. Repairs and maintenance must be performed by specially trained technicians. Do not open the case and adjust the machine without the permission of the equipment manufacturer. Otherwise all guarantees from the manufacturer will automatically expire. Operators must strictly observe the safety and use of the operating manual. Before starting and using, make sure that the cable is properly connected and that the ultrasonic welder is properly grounded. Always maintain the welding machine and welding tools on time to ensure that the machine is working under normal conditions. When there are some abnormal conditions and sounds during the welding process, in order to avoid damage to the machine, please stop using it immediately, and maintain it by relevant professionals or contact the after-sales personnel.