All day long to prevent cutting corners, but you do not even know how to cut corners, how to prevent? Today Xiao Bian gave everyone a detailed review of what local workers are prone to cutting corners and want to help everyone!
First, uneven wall treatment
In many cases, the wall surface treatment is not smooth, and unevenness results in uneven wall surface. After the paint is applied, there is a color difference. When the paint is applied, the latex paint is discolored and peeled, or the ceramic tile is not stuck firmly. Therefore, when applying a latex paint, you must pay attention to whether the wall putty is even and smooth, and whether the sanding and rolling are in place. In addition, you should pay attention to the suitability of the latex paint.
Second, uneven ground leveling
Many workers cut corners when leveling the ground. Some houses are not evenly leveled, and the result is more uneven! If you use too much cement mortar, it is easy to increase the ground load, bring security problems to the building, regular operation without protection will return to the sand is very serious, and some only in the sand sprinkled with a layer of cement over the surface of the owner.
Third, the small face can not handle
Usually the small face refers to some small places that are not easily noticeable, such as the upper edge of the door, the underside of the window sill, and the inside of the heating cover. Some workers will cut corners or even do nothing at this point. .
Fourth, it is easy to cause hidden troubles due to the poor wearing of electrical wires
In home renovation construction, almost all wires are put in PVC pipes and buried in the walls. Therefore, after the electric wire is put into the PVC pipe, the consumers cannot see it at all and it is difficult to replace it. If the worker is not careful in the operation, it will cause the wire to kink in the tube, causing electrical hazards. If the workers intentionally cut corners, they would use wire with connectors or put several wires in the same PVC pipe.
Fifth, seam modification and perfunctory
In some places where the wall meets the door and the window, and where the two different colors of paint meet, it is also where the workers often perfunctory. You will often see mixed paints between latex paint and wood, with various problems at the joints. What's more, the wood is painted with a wall paint.
Frequent cutting corners
A Workstation sink is a sink with a mechanism built in to the front and back sides of the bowl to allow accessories to sit on the step or ledge, affording the user to prepare meals on the sink instead of on the countertop. The intent behind the design is to speed up the process of food preparation and clean-up.
Workstation Sink,Farmhouse Workstation Sink,Work Station Kitchen Sink,Workstation Farmhouse Sink
JIANGMEN MEIAO KITCHEN AND BATH CO.,LTD , https://www.jmmeiaogroup.com