Nowadays, people have higher and higher requirements for bathroom. It is very practical to install a shower room in the bathroom. It has become a fashion. However, choosing a shower room not only allows us to enjoy the pleasure of the shower, but also avoids the cumbersome cleaning caused by dirty water overflow. Therefore, under the premise of keeping warm, we should pay attention to the effect of dry and wet distinction. Then, the next small series introduces you to the shower room installation steps and the benefits of the shower room.
Shower room installation steps
1. Prepare the necessary tools for use.
2. Install the bottom basin: Prepare the bottom box parts, adjust the level of the bottom basin, and ensure that there is no water in the basin and the bottom of the basin. The hose can be flexibly connected according to the distance, and the bottom of the basin is firmly connected to the floor drain.
3. Test and protection: After the installation, the water should be tested, so as to ensure the smooth flow of the sewer. Find and punch: Use a pencil and a level to determine the drilling position of the aluminum against the wall and punch the hole with a hammer drill.
4. Install aluminum: Insert the rubber in the hole and lock the aluminum bar to the wall with screws.
5. Fix the glass: Lock the glass to the hole in the bottom basin and fix it with screws.
6. Install the top tube: You can drill holes in the fixed glass position, connect the top tube with the fixed seat, and fix it to the top of the glass with the curved sleeve.
7. Installation rack: When installing the rack, tighten the laminate nut and fix the laminate glass to maintain vertical and horizontal. Be careful to waterproof under the fixed glass of aluminum.
8. Install the movable door: When installing the hardware, fix the hinges, adjust the position of the shaft after installation, and feel the best when closing the door.
9, do a good job of waterproof: do waterproof, it is best to install water retaining strip on the side or below. Use aluminum mesh to seal the seam between the aluminum and the wall, glass and bottom basin.
10. Finishing work: In order to ensure that the appearance is neat and tidy, the decorative aluminum strips should be inserted into the wall-mounted aluminum material, and finally the entire shower room should be wiped clean with a rag.
What are the benefits of the shower room?
1. The shower room is equivalent to having a separate space, so that people can take a bath, others can think it is convenient, and the shower room has a sense of security, and does not affect each other, which is convenient for daily life.
2. The area of ​​the general family bathroom is relatively small. If the bathtub is installed in the bathroom, it will waste a lot of space, waste a lot of water when bathing, and it is contrary to the energy-saving, environment and frugal lifestyle we advocate. Moreover, the toilets in many homes cannot be installed in bathtubs due to their small size. If a shower room is installed, it saves space and saves a lot of water.
3, in order to ensure the separation of the bathroom dry and wet, it is very necessary to install the shower room, so that people will not splash outside the shower room when bathing, so dry and wet separation.
4, in the winter when the shower room can play a good role in warmth, water vapor can be concentrated in a limited space, the heat will not be lost quickly, the bath inside is warm and convenient, but also a certain savings effect. Bathing in the winter If the bathroom is large and there is no shower room, even if there is heating, it often feels very cold.
Material characteristic: Using high quality aluminum extruded shutter profiles, multi-layer painting or film layer surface have excellent scratch resistance function, not decay, wearable and anti-collision.Nice white profiles, accepting mass customization according to users requirements(light gray, brown, cream, wood, fused, sand color and light sand color ,etc.)
Integrated protection and decorative features together,the best replacement of traditional theft network security replacement; flexible way open ways, supporting hand control, group control. The door could be your safe rescue channel when in emergency.
When in state of close, support ventilation and lighting, this contribute to enhance the cooling and heating effect of air conditioner, ensure safety, comfortable, energy saving, noise isolation and aesthetics.
Aluminum Roller Shutter Door,Commercial Aluminum Roller Shutter Door,Aluminum Alloy Roller Shutter Door,Color Steel Aluminum Roller Shutter Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfgaragedoor.com