Building intercom has entered the Chinese market for more than two decades. However, in the past 20 years or so, the theme of “stability†has been unsatisfactory, and the building intercom system has been fully automated for one year and two years. The phenomenon of no movement for three years appears frequently.
Product manufacturers and contractors and system integrators have become directly responsible.
In general, manufacturing companies provide a complete set of building intercom systems, including products and technology solutions, while contractors and system integrators provide wire and construction. The stability of the building intercom system is closely linked with product technology, wire rods, integration schemes and construction specifications. The weakness of any link is a factor that contributes to the instability of building intercom systems. Everyone knows the reason, but there is no standard.
1. Security systems are not residential pre-conditions for occupancy In recent years, domestic security monitoring systems have developed rapidly, but the related supporting hardware and software environment has not been followed up in a timely manner. Like a child who just walks, walking too fast will surely fall. Recently, there have been frequent failures of the security system, including the five major systems of the community, including television monitoring, building intercom, perimeter alarm, electronic patrol and household alarm. In some places, there have even been cases where the rate of “alarms†for households’ alarms has reached nearly 80%. Fundamentally speaking, there are the following reasons for failing to maintain safety and security, and there are many parties involved in accountability.
First, congenitally deficient, the security system does not belong to the preconditions for the issuance of the “New Residential Check-in Permitâ€, which makes the security system less important. Its layout design has no standards and no supervision, causing many layout designs to be unreasonable.
The second is that the use of security products is not standardized and maintenance and updating costs are difficult to implement.
Third, the residents' own awareness of prevention is not enough, and even intentionally or unintentionally destroyed the function of these preventive measures.
In short, whether it is an alarm monitoring system or a building intercom system, in the entire product life cycle, it involves product manufacturers, installation contractors, system integrators, authorities and users, and even other systems, such as Supply and distribution systems, lightning protection grounding systems, etc., so the definition of responsibilities is very difficult. The reason why the responsibility is defined is nothing more than to be able to solve the problem. Su Wenbin, executive director and general manager of Huada University Huada Digital Technology Co., Ltd., believes that if the system can be used normally during the design's life cycle, both the warranty and third-party insurance solutions can be used.
2, the lack of industry standards, product incompatible with the alarm monitoring system, building intercom systems are technical protection products, but also belong to electronic products, its nature determines whether the normal operation depends on technology and management. The problem of technical quality belongs to the responsibility of the production company, and the responsibility of the management problem belongs to the product maintenance manager.
In many cases, it is not the product itself, such as irresistible natural disasters, lightning protection or electromagnetic compatibility problems in the installation and construction of the system, and even improper use of the user itself. At the same time, the qualified products of production companies are also flawed. Due to the imperfection of our country's current product quality control legislation, even the products of qualified inspection-exempt enterprises will have problems. What's more, the development of technology is very fast. Whether or not to pass the test and verify, what kind of changes need to be detected again, the problem itself has not been resolved.
The lack of a unified industry standard has brought a lot of troubles to system maintenance. It has also led to the irregularity of the entire intercom industry. Products are uneven and incompatible with each other. Many manufacturers' products cannot withstand the interference of various environmental factors. The system that can be normally used is prone to short circuit, open circuit, and other faults in actual use.
Product manufacturers and contractors and system integrators have become directly responsible.
In general, manufacturing companies provide a complete set of building intercom systems, including products and technology solutions, while contractors and system integrators provide wire and construction. The stability of the building intercom system is closely linked with product technology, wire rods, integration schemes and construction specifications. The weakness of any link is a factor that contributes to the instability of building intercom systems. Everyone knows the reason, but there is no standard.
1. Security systems are not residential pre-conditions for occupancy In recent years, domestic security monitoring systems have developed rapidly, but the related supporting hardware and software environment has not been followed up in a timely manner. Like a child who just walks, walking too fast will surely fall. Recently, there have been frequent failures of the security system, including the five major systems of the community, including television monitoring, building intercom, perimeter alarm, electronic patrol and household alarm. In some places, there have even been cases where the rate of “alarms†for households’ alarms has reached nearly 80%. Fundamentally speaking, there are the following reasons for failing to maintain safety and security, and there are many parties involved in accountability.
First, congenitally deficient, the security system does not belong to the preconditions for the issuance of the “New Residential Check-in Permitâ€, which makes the security system less important. Its layout design has no standards and no supervision, causing many layout designs to be unreasonable.
The second is that the use of security products is not standardized and maintenance and updating costs are difficult to implement.
Third, the residents' own awareness of prevention is not enough, and even intentionally or unintentionally destroyed the function of these preventive measures.
In short, whether it is an alarm monitoring system or a building intercom system, in the entire product life cycle, it involves product manufacturers, installation contractors, system integrators, authorities and users, and even other systems, such as Supply and distribution systems, lightning protection grounding systems, etc., so the definition of responsibilities is very difficult. The reason why the responsibility is defined is nothing more than to be able to solve the problem. Su Wenbin, executive director and general manager of Huada University Huada Digital Technology Co., Ltd., believes that if the system can be used normally during the design's life cycle, both the warranty and third-party insurance solutions can be used.
2, the lack of industry standards, product incompatible with the alarm monitoring system, building intercom systems are technical protection products, but also belong to electronic products, its nature determines whether the normal operation depends on technology and management. The problem of technical quality belongs to the responsibility of the production company, and the responsibility of the management problem belongs to the product maintenance manager.
In many cases, it is not the product itself, such as irresistible natural disasters, lightning protection or electromagnetic compatibility problems in the installation and construction of the system, and even improper use of the user itself. At the same time, the qualified products of production companies are also flawed. Due to the imperfection of our country's current product quality control legislation, even the products of qualified inspection-exempt enterprises will have problems. What's more, the development of technology is very fast. Whether or not to pass the test and verify, what kind of changes need to be detected again, the problem itself has not been resolved.
The lack of a unified industry standard has brought a lot of troubles to system maintenance. It has also led to the irregularity of the entire intercom industry. Products are uneven and incompatible with each other. Many manufacturers' products cannot withstand the interference of various environmental factors. The system that can be normally used is prone to short circuit, open circuit, and other faults in actual use.