As we all know, painting the wall is an essential part of the renovation of a new house. Although the painting of a wall is not a difficult task, it must be constructed in accordance with the correct steps so that the wall can be painted better. . How to paint the new house wall? Let's take a look at the wall painting steps with Xiaobian.
First, wall painting steps - wall repair
The wall of the rough room cannot be painted directly. First, the base of the wall must be flat and there must be no powdering or shedding. Second, if there is a groove on the wall, it should be scraped with the help of putty powder, and there are places where the yin and yang angles on the wall should use the ink line to show the verticality and flatness. 
Second, the wall painting steps - scraping putty powder
Before putting the putty powder, you must first understand the formulation instructions of the putty, and then match according to the deployment instructions. Next, stir the putty powder as much as possible while stirring, and then use it after standing for about twenty minutes. When the putty powder is applied, the force should be uniform so that the putty powder can be fully adhered to the wall surface, so that one step can be achieved without repeated painting. 
Third, the wall painting steps - sandpaper grinding
After the putty powder dries out, if there are some spots on the wall that are not smooth, sanding can be used for grinding. Grinding rakes are to be ground from the center of the four sides, and secondly, be careful when grinding corners. At the same time, when you polish, you must use even force. Do not put too much pressure on the putty layer. 
Fourth, the wall paint steps - paint
The primer should be applied to the top coat first. The primer not only seals the wall, but also improves the adhesion of the top coat, as well as alkali and anti-corrosion. In addition, the price of topcoats is generally higher than that of primers. When the primer is used first, the amount of topcoat can be saved, thereby reducing the cost of wall decoration. When brushing the paint, first put the door, wardrobe, and other transfer parts with a color separation paper to avoid staining during construction. Second, latex paints and other wall accessories should all use the same brand and model to avoid color differences and quality problems. When the topcoat is formulated, it is best to operate according to the ratio, and it is not possible to deploy too thin or too dissolving. 
Editor's summary: The above is a description of how to paint the walls of the new house and how to paint the walls , hoping to help the majority of friends. If you need to know more about wall painting, you can always pay attention to us. The following articles will be more exciting.
Swing Gate Garden Gate,Round Tubes Swing Gates,Dark Green Garden Door,Wire Mesh Sliding Door
Anping Xinlong Wire Mesh Manufacture Co.,Ltd. , https://www.hbzhaoxuan.com