With the improvement of living standards, no matter which family, it can be said that more and more electrical products, so this time matching the needs of the wall switch socket will also increase, if you do not have a good layout in the decoration, the latter use It will be very troublesome. The following Xiao Bian will introduce to you how to connect the wall switch socket and switch socket installation precautions.
How to connect the wall switch socket
1. If the wall switch is used to control the on and off of the outlet power, the wiring method is as follows: first, the L terminal of the line access switch (ie, the FireWire inlet), and then the L1 terminal of the switch (ie, the FireWire) The outlet) is connected to the L terminal of the two-hole socket (ie, the hot wire terminal), and then the neutral wire is connected to the N terminal (zero wire terminal) of the socket.
2. If there is no switch control in the socket, then you will have to control the lamp, then the wiring method is: connect the fire wire to the L terminal of the switch, and connect the L1 terminal of the switch to a terminal of the lamp cap. The other terminal of the neutral wire access lamp, the switch and the lamp form a loop. Then connect the fire wire to the L terminal of the two-hole socket, and insert the neutral wire into the N terminal of the socket. The two-hole socket becomes another loop.
Switch socket installation precautions
1. When the switch socket is installed, it cannot be installed on the flammable object. In the event that the flammable object burns, the jacket of the switch socket may be burned out. As a result, the core of the switch socket will be exposed and water vapor will enter, which will cause a short circuit. It even triggered a fire.
2. The wall switch socket shall be equipped with an arc-extinguishing device. This installation can avoid the risk of fire or explosion caused by the leakage of flammable gas.
3, wall switch socket installation This is also divided into wall mounted and concealed points, generally like the wall mounted can not be less than 1.8m, if it is concealed can not be less than 0.3m, the socket between the kitchen and bathroom should be high On the ground 1.5m, air conditioning sockets should be higher than 2m.
4, when the switch socket wiring must follow the principle of "fire line into the switch, the zero line into the lamp", and must remember to install the leakage protection device.
5, the wall switch socket is best to install a protective box or baffle, so as to avoid water or oil infiltration, causing a short circuit or leakage. In particular, families with children are at risk of electric shock in order to prevent children from reaching for a hand when they are playing.
6, the plug in the socket is broken, must be replaced on it, it is best not to use bare wire instead, or else it is more likely to have a fire.
7. The wall switch socket in the kitchen cannot be installed above the stove top, mainly because of the high temperature here, which will also cause the socket to be overheated and be damaged.
Summary: How to connect the wall switch socket and switch socket installation notes explain the relevant content to introduce this, the wall switch socket wiring looks to be relatively simple work, but must not be sloppy, if the consequences after the wrong is difficult to imagine, so in the installation At the same time, we must pay attention to some details.
Solar Street Light,High Quality Solar Street Light,Solar Street Light Details, CN
Wuxi Shengda Yukun Energy Development co.,Ltd , https://www.xlite-solarlight.com