In the process of using high pressure gear pump, the bearing plays a key role in the operation of high pressure gear pump, so it is very important to clean the bearing regularly. Xiaobian to introduce the following high pressure gear pump bearing maintenance methods, that is, the correct way to clean the bearings. 1, the process of using imported bearings, regular cleaning is very important. First remove the inspection bearings, the first use of photography and other methods to make a good appearance record. Also, check the amount of lubricant remaining and sample the lubricant before cleaning the bearings. 2, the bearing cleaning points rough cleaning and fine cleaning, and the bottom of the container can be placed on the metal grid. 3, rough wash, remove the grease or adhesive in the oil with a brush. At this time if the bearing rotation in the oil, pay attention to damage due to foreign bodies rolling surface. 4, fine wash, slowly rotate the bearings in the oil, to be carefully carried out. 5, the commonly used cleaning agent is neutral, non-water-containing diesel or kerosene, sometimes depending on the need to use warm lye and so on. No matter what kind of cleaning agents, should always be filtered to keep clean. 6, after cleaning, immediately coated with anti-rust oil or rust-proof grease on the imported bearings. Above is the high pressure gear pump maintenance of bearings, hoping to help you later to better use and maintenance of high pressure gear pump. Further reading: IFAT China Guangzhou exhibition industry leaders building water pump manufacturers ranking article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor: lindj (QQ / WeChat:) Starting: http://beng.liuti.cn/ (Service Hotline:)
GUANGDONG LAVIUS LIGHTING CO., LTD. , https://www.laviuslighting.com