| Home>Bearing knowledge>Discussion: Shaping system for oscillating screen bearings |
Discussion: The method of depicting the oscillating screen bearing pain system
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
1. Oscillating screen: The vibrating source is an exciter; it is usually composed of an oscillator, a screen box, a vibration isolation device, a transmission device, etc. The vibrating screen has a rectangular screen surface; it is installed on the screen box. The machine and the screen surface are under the effect of the oscillator; the oscillation of the circular, elliptical or linear track occurs. Because the oscillation of the screen surface makes the material layer on the screen surface loose and throw away from the screen surface; The material layer falls and is discharged through the sieve hole; the particles stuck in the sieve hole are vibrated; except for the screening effect; and the material is moved forward.
2, circular vibrating screen: inertial vibrating screen with circular orbit is a circular vibrating screen; referred to as circular vibrating screen. This inertial vibrating screen, also known as single-axis vibrating screen circular orbit inertial vibrating screen can be used for various screening operations. a circular oscillating track of the screen surface; the material on the screen surface is continuously turned over and loosened.
The circular vibrating screen has the following characteristics:
1) The fine-grained stage moves to the lower part of the material layer;
2) The material stuck in the mesh hole can jump out; avoid the mesh hole blocking,
3) The screening power is higher,
4) The screen inclination can be changed; then the movement speed of the material along the screen surface is changed; the disposal amount of the sieve is improved,
5) Regarding the difficult-to-screen material, the spindle can be reversed; from the sand washing machine manufacturer, the direction of oscillation is opposite to the direction of movement of the material; the moving speed of the material along the screen surface is decreased (in the case where the inclination angle of the screen surface is the same as the spindle speed); Screening power.
Recommend to friends comments close window
| Bearing related knowledge |
| Analysis of Mistakes in Replacement of Roller Bearings by Novices Necessity of SKF Bearing Timing View Vertical Mounting Spherical Bearing Classification Several aspects that should be considered when selecting bearing clearance Summary of the NSK bearing rear code name (2) |
This article links to http://
Please indicate China Bearing Network http://
Previous:KOYO Bearing-Heavy Duty Bearings Next: How to protect universal joint cross shaft bearings
House Appliances Solenoid Valve Armature Assembly
The category of armature assembly used in home appliances Solenoid Valve, such like Coffee Machine Solenoid Valve, water purifier solenoid valve, washing machine water inlet solenoid valve, ro solenoid valve, Steam Iron Solenoid Valve, refrigerator solenoid valve, and so on.
1. The tube OD sizes range from 5mm to 23mm, big than 23mm is also available
2. The valve seat orifice sizes ranges from 0.6mm to 4.0mm and higher for special applications.
3. Choose the suitable material for the application as Brando offers plunger tubes in brass and stainless steel.
4. Spring: Rustproof SUS304 stainless steel, with good performance of restore.
5. Seals: Options of NBR, HNBR, FKM, EPDM, PTFE, food grade materials, welcome your other requirements.
6. Shading ring: Cooper and silver material available.
7. Washer and retaining nut provided if has demands.
Coffee Machine Solenoid Valve Armature, Steam Iron Solenoid Valve Armature, RO Solenoid Valve Armature
NINGBO BRANDO HARDWARE CO.,LTD , https://www.brandopneumatic.com