Analysis of the method of fixing the outer ring of imported bearings

Source: China Bearing Network Time: 2018-04-12

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The method of fixing the outer ring of the imported bearing is as follows
1. The retaining ring is fixed to the outer ring of the radial bearing with a retaining groove. This fixing method can be used. The structure is simple and the axial dimension is small. It cannot withstand large axial loads.
2. The circlip retaining structure is simple, the assembly and disassembly is inconvenient, and the axial dimension is small. The adjusting ring is added between the bearing end face and the retaining ring; the axial position of the adjustable bearing is also compensated; the compensation processing and the disassembly error are used. Where the axial load is not large.
3. The end cap is fixed for the fixing of the centripetal and centripetal thrust bearings at the shaft end. The end cap can be made in various forms. When the end cap is a through hole; it can also be equipped with various sealing devices. It is used for high speed; axial load Larger place.
4. Thread ring fixing is used in places with high speed and large axial load. The thread ring can also fix the bearing clearance of the radial thrust bearing face-to-face. However, the thread ring should have anti-loose method.
5. The scheduling screw and the adjustment cover are fixed similarly to the end cover. This device facilitates the scheduling of the bearing clearance outside the box. The scheduling screw should have a loosening method.

Recommend to friends comments close window

Bearing related knowledge

Jiang drill trial production success Metal bearing seal drill cone roller bearing and pump shaft bearing device resolution Four factors of imported bearing quality Cummins KTA19 engine how to open the crankshaft and main bearing Jinan Bearing handle the status quo and improvement measures (2)

This article links to http://
Please indicate the bearing network http://

Previous:The four key points for correct force application when assembling and disassembling fag bearings: Identification of electric fan bearings on the market

SUN YAT INDUSTRY LIMITED , https://www.ernte-eu.com