Features: high color transparency, odorless, strong adhesion, resistance to atmospheric aging; through SGS testing, REACH, ROHS, halogen certification, MSDS material safety certification, some products have achieved FDA certification.
1, 1 hour epoxy AB glue to clean the surface of the bond of water, dust, grease, rust and other dirt, keep clean, dry, flat.
2, quick-drying epoxy AB glue
When using, mix A glue and B glue in a 1:1 ratio and mix evenly, apply it on the surface of the adhered object, make it fit as much as possible when fitting, and fix the glue in 10-20 minutes, and it can be used in 1 hour. Strength, 24 hours to achieve the best results. Available from -60°C to 100°C. (Do not mix a large amount of glue at one time).
3, epoxy resin transparent AB glue to clean the surface of the bond of water, dust, grease, rust and other dirt, keep clean, dry, flat.
4, transparent epoxy AB glue use AB glue rush plastic. As shown below: convenient and quick. ?
1. Why is the glue curing fast?
A: If the glue cures too fast and it is inconvenient to operate, it is recommended to use a small packing hose for automatic mixing.
2. Why does the glue smell big?
A: The sticky metal special material has odor but no toxicity. It is recommended to use a small packing hose to automatically mix the odor.
3, how to clean the overflow glue?
A: Clean it with a towel or cloth.
4. Is the glue resistant to aging?
A: This glue has good corrosion resistance, acid and alkali resistance, and excellent aging resistance.
1, A, B two agents must be stored in a cool place.
2, A, B two agents such as a large number of mixed, rapid curing will cause danger, should be particularly careful, mixing glue to the right amount.
3, after the use of high-strength epoxy resin AB glue, such as the skin attached to the agent, should be washed with soap.
4, anti-yellowing AB glue adjusting tools or containers can not be mixed, so as not to shorten the service life of A agent.
Gin Pole Operations
On the documentation side on things, operator will need adequate details depicting the planned operational configuration(s) for the complete gin pole system to be used including:
•Gin pole mast
•Top lifting block
•Load and tag line sizes/configuration (including use of heel block, max load position angle, max tag angle, tag arrangement, etc.)
•Basket and bridle attachment to gin pole and supporting structure including associated hardware and sling sizes/config
•All relevant details pertaining to jumping/lowering the pole into position
•All relevant details pertaining to tilting the pole for operation (use of luffing block, etc.)
•Any other relevant details based upon user`s planned operational configurations for assembly, setting, jumping, arranging, lifting, and/or removal of the system
As pole manufacture MARSHINE we only address the gin pole mast and allowable load and tag capacities / angles based solely upon the mast`s rated strength. Affirming the pole was designed, built and load charts are in accordance with the ANSI/TIA-322 standard. Its operator responsibility to ensure they are in compliance with all regulations related thereto.
Complete records of pole inspections and record of Magnetic particle inspection shall be performed on 10% of the welded connections every 10 years.
Annual inspections reports shall be maintained for a minimum of two years.
All gin pole operations must be in compliance with the latest revision of ANSI/TIA-322 and the OSHA CPL 2-1.36
Maintain your required documents along with work plan, engineer sign off for each specific job.
ANSI/TIA-322 standard includes an impact factor of 1.7 for all gin poles using synthetic load lines.
Gin Pole storage racks for gin poles are recommended for safe transport, storage and return shipping for inspection service. These units protect and reduce the potential of damage from excess handling with forks etc.
Gin Pole
Tower Gin Pole,Stringing Euqipment Gin Pole,Tubular Gin Pole,Aluminum Alloy Gin Pole
NINGBO MARSHINE POWER TECHNOLOGY CO., LTD. , https://www.marshine-power.com